Insignia NS-BBBT20 User Manual page 12

Skipping or searching a CD track
During playback, press
1
previous track, respectively.
Press and hold
2
track forward or backward, respectively.
Using repeat mode
Press BAND/PLAY MODE while in playback mode to cycle through the repeat
1
modes (Repeat current track, Repeat all, Random). The following appears
on the display:
- turns on—Repeat current track
- turns on—Repeat all tracks
- "RANDOM" turns on—Random playback
To cancel repeat mode, press BAND/PLAY MODE until the Random/Repeat
2
icon disappears from the display.
Playing cassette tapes
Press (Standby/ON) to turn on the boombox.
1
Press
2
display.
Press STOP/
3
Insert a cassette tape into the door, then gently push the door closed.
4
Note: Make sure that you slide the cassette tape into the slot in the cassette
door. Do not place the cassette tape directly onto the tape drive mechanism.
Press REW or
5
want, then press
Press PLAY to begin playback.
6
Press PAUSE to pause playback. Press
7
Press STOP/
8
door.
Recording to cassette tape
Note: For the best possible recording quality, only use normal bias cassette
tapes (Type I).
Recording to cassette tape from the radio
Press (Standby/ON) to turn on the boombox.
1
Press
2
select AM or FM.
Insert a cassette tape into the door, then gently push the door closed.
3
Press
4
Press REC and
5
Press PAUSE or
6
12
(next) or
(next) or
(source) repeatedly to select TAPE mode. "CAS" appears on the
EJECT to open the cassette door.
FWD to wind the cassette tape to the starting point you
STOP/
EJECT to stop playback. Press again to open the cassette
(source) repeatedly to select RADIO mode, then press BAND to
(next) or (previous) to tune the radio to the station you want.
PLAY together to begin recording.
STOP/
www.insigniaproducts.com
(previous) to skip to the next or
(previous) to quickly search the current
EJECT to stop the cassette tape.
PAUSE again to resume playback.
EJECT to pause or stop recording, respectively.
NS-BBBT20