HINTS ON PRINTER CONNECTION
Printers (and other devices) recommended by NCR are fully com
patible with the NCR DECISION MATE V; with the appropriate
adapter the device can be connected to the computer, without
any modifications, and it will function correctly. Many other de
vices, that have not been tested by NCR, are also fully compati
ble and can be connected without any modifications being carried
out. Other RS-232C and Centronics-compatible devices may re
quire some modifications to make them fully compatible with the
NCR DECISION MATE V.
This section provides some hints on how to connect non-
recommended devices.
• Study the descriptions and schematics in the hardware part of
this manual
• Read the section "Interfacing Printers"
• Study the documentation provided with the device that is
being connected to the computer
• Select the adapter kit that matches your requirements as near
as possible
• Only one printer or plotter may be connected to the computer
at a time
CENTRONICS PERIPHERAL ADAPTER (K210)
Generally, Centronics-compatible printers can be connected
without difficulty. This type of interface offers the following
advantages:
• No strapping required
• High transmission speed
• Status signals (e.g. out-of-paper) easily controlled by appli
cation software
NOTE: Some printers (e.g. Epson) are Centronics and RS-232C
compatible and it may be necessary to make a printer hard
ware change; check the printer documentation. Many printers
will not function until the operating system software has been
loaded.
RS-232C PERIPHERAL ADAPTERS (K212, K213)
Using RS-232C compatible printers generally requires more care
ful selection of printer and interface. Some form of strapping is
often required in three different areas:
2-68