Model And Kit Identification - NCR Decision Mate V Hardware System Technical Manual

Kit 230 functions similarly to K231, but is connected inter­
nally to the controller board. This kit should be installed by a
field engineer; it is not suitable for installation by the user.
Tilt Mechanism
This kit (K240) provides a means of tilting the NCR DECISION
MATE V by seven degrees. The user can easily install the device
by fixing a base plate to the bottom of the computer, using the
existing holes in the base of the cabinet.
NCR O M N IN ET Transporter
This kit (K600) can be installed, by the user, directly into the
I/O bus (slots 2 to 6). The adapter has twice the thickness of
other adapters, therefore it requires two slot positions for installa­
tion. The adapter provides the interface between the NCR DE­
CISION MATE V and the DECISION NET System.
MODEL AND K IT ID E N TIFIC A TIO N
The configuration of the hardware is defined by the model num­
ber. The standard arrangement of the model number is shown
below:
3 2 7 3 - x x x x
The model number of the NCR DECISION MATE V is shown
in Figure 1.2. The optional features are shown in Figure 1.3. An
asterisk indicates a planned development not released at the time
of printing, but included for reference.
1-6
- x x x x
Language code
Power code
Sub model
Major model
NCR class number