Handling; Cleaning And Care - Seto ALDEBARAN 360 GRAD FLEX-C 2.0 Series Instructions For Use Manual

The ALDEBARAN
®
can be controlled via the two toggle switches and
the rotary knob (only with dimmable versions) on the
control unit. The control unit is integrated into the
supply line.
With every toggle switch, 2 light modules are switched
(ON/OFF).
By turning the potentiometer clockwise, the illumi-
nance level can be increased, counter clockwise lowers
the illuminance level (only with dimmable versions).
Control unit
Malfunction
Error Possible
cause
1 light module Defect in light
without function module
2 light modules Toggle switch
without function OFF
All 4 light No voltage
modules without
function
Luminaire cannot Defect of the
be dimmed rotary knob
Extreme discre- Defect of the
pancy in the active cooling
brightness of one
light module
14

Handling

360 GRAD FLEX-C 2.0 luminaire
Potentiometer
Toggle switches ON / OFF
Solution
Ask your trained
electrician or the
manufacturer
Check the control
elements (toggle
switches)
Check the voltage
supply
Ask your trained
electrician or the
manufacturer
Ask your trained
electrician or the
manufacturer

Cleaning and care

For cleaning the plastic / metal parts, do not use any
solvents, alcohols or other chemicals. For removing
dirt, dust, oil, grease etc., use a soft, dry and lint-free
cloth.