9 Setting up power supply
1. Remove the battery compartment cover.
2. Insert battery(ies) into the battery compartment. Ensure that the battery polarity (+/-) is correct.
3. Replace the battery compartment cover.
10 Control buttons
Illustration 2: Control buttons
1 On / off power switch: To turn the metal de-
tector on or off.
3 Button ALL METAL: Find all kinds of metal
5 Button NOTCH: selectively eliminate a cat-
egory from detection within the metallic spec-
trum
7 Headphone Jack
9 Volume wheel: For adjusting the volume.
2
1
3
4
5
6
7
8
2 + / - buttons: Increase or decrease value.
4 Button DISC: eliminate unwanted objects from
detection
6 Button SENS: Sensitivity adjustment mode
8 Button DISC/NOTCH: To set the MIN/MAX
target range, first press the DISC/NOTCH but-
ton and then the +/- buttons to increase or de-
crease.
2
9
19 / 24