Download Print this page

Texas Instruments TI-85 Setup Manual page 8

Graphing calculators part b
Hide thumbs Also See for TI-85:

Advertisement

B-8
TI-85/TI-86 Graphing Calculators
1.1.4 AUTOMATICALLY CHANGING THE VIEW OF THE GRAPH
of the graph is not good or if you do not see the graph, change the view using the built-in
autoscaling feature of your calculator. This option will automatically find a view to see a l l
the functions that you have turned on in the graphing list.
Be sure the function you are graphing, y = 1000(1 + 0.05)
y(x)= list. (Delete all other functions that may be entered in other locations.) Before doing
what follows, access the graphics menu with
To access the range on the TI-85 (called the window on
the TI-86), press
not matter what values are set in the yMin and
yMax positions.) Press
Your calculator automatically sets a vertical view
(based on the xMin and xMax you set) and draws a
graph of the function.
1.1.5 TRACING
You can display the coordinates of certain points on the graph by tracing.
The x-values shown when you trace depend on the horizontal view that you choose, and t h e
y-values are calculated by substituting the x-values into the equation that is being graphed.
With the graph on the screen, press
and use
to move the trace cursor to the right
and
to move the trace cursor to the left.
The number 1 in the upper right hand corner of the
screen tells you that you are tracing on the equation
in y
.
1
Trace past the edge of the screen and notice that even
though you cannot see the trace cursor, x and y values
of points on the line are still displayed at the bottom
of the screen. Also notice that the graph scrolls to the
left or right as you move the cursor past the edge of
the current viewing screen.
1.1.6 ESTIMATING OUTPUTS
is important to realize that such outputs are never exact values unless the displayed x-value
is identically the same as the value of the input variable.
. Set xMin to 0 and xMax to 10. (It does
F2
(
)
F3
ZOOM
MORE
(
F4
You can estimate outputs from the graph using TRACE. I t
x
, is entered in the y1 location of t h e
.
GRAPH
(
) .
F1
ZFIT
)
TRACE
Copyright © Houghton Mifflin Company. All rights reserved.
If your view

Advertisement

loading

This manual is also suitable for:

Ti-86