Advertisement
B-20
TI-85/TI-86 Graphing Calculators
To enter data using the list editor,
Press
(
2nd
–
editor. Enter the name L
press
.
ENTER
Enter the first y-value as e
enter the second y-value as e
TI-86 Even though both of the methods discussed above are ways to enter data on t h e
TI-86, the most convenient method is to enter the data in the TI-86Õs stat lists. Return to
the home screen and press
delete the data currently in these lists, and enter the data again using the method
described next.
Position the cursor in the first location in list L
the x-data into list L
to bottom in the L
entry.
After typing the L
top of list L
. Enter the y-data into list L
2
the entries from top to bottom in the L
ing
after each entry.
ENTER
1.4.2 EDITING DATA IN THE TI-85 LIST EDITOR
value, access the data with the list editor and use the cursor keys to move to the value you
wish to correct. Type the correct value and press
¥
To insert a data value, put the cursor over the value that will be directly below the one
you will insert, and press
down one location and a 0 is filled in at the insertion point. Type the data value to be
inserted and press
¥
To delete a single data value, move the cursor to the value you wish to delete, and press
(
) . The values in the list below the deleted value move up one location.
F2
DELi
1.4.2 EDITING DATA IN THE TI-86 STAT LISTS
use the cursor keys to darken the value you wish to correct and type the correct value. Press
.
ENTER
¥
To insert a data value, put the cursor over the value that will be directly below the one
you will insert, and press
)
(
) to access the list
LIST
F4
EDIT
at the name prompt and
2
, press
1
ENTER
, etc.
2
(
2nd
+
STAT
by typing the numbers from top
1
column, pressing
1
ENTER
(
) value, 1997, use
1
5
2
(
) . The values in the list below the insertion point move
F1
INSi
. The 0 is replaced with the new value.
ENTER
2nd
DEL
If there are data values in this
list, see 1.4.3 of this Guide and
or
,
first delete the ÒoldÓ data.
)
(
) . Go to Section 1.4.3 of this Guide,
F2
EDIT
. Enter
1
after each
to go to the
by typing
2
column, press-
If you incorrectly type a data
.
ENTER
If you incorrectly type a data value,
(
) . The values in the list below the insertion point
INS
Copyright © Houghton Mifflin Company. All rights reserved.
Advertisement
