Adjustments - Hollis LTS Series Owner's Manual

ADJUSTMENTS

Most Hollis BCD's do not require any assembly, but there are adjustments and items that can be
removed or added to your Hollis BCD to customize it for best fit.
CUMMERBUND ASSEMBLY
If your Hollis BCD product comes equipped with an adjustable cummerbund, you can access the
cummerbund for adjustment by removing the top of the back pad that is attached to the harness with
an elastic loop (Fig. 1). This will expose the cummerbund ends. To adjust, pull the cummerbund out of
the harness sleave, and undo the self gripping fastener of the cummerbund (Fig. 2, 3). Reposition to
the desired length and reattach the self gripping fastener to secure (Fig. 4). Weave the cummerbund
back through the harness sleave (Fig. 5). Repeat with the opposite side of the cummerbund. Then
replace the backpad.
Fig. 1 Fig. 2 Fig. 3
10