Base Plan, Static Load And Weights - LEGRAND KEOR HP Series Installation And Start-Up Manual

3.3.1 Base plan, static load and weights

Picture 3 – Base plan
Power (kVA)
L1 (mm)
P1 (mm)
L2 (mm)
The supporting base of the UPS must be designed to carry the UPS weight and to ensure its
steady and safe support.
Its carrying capacity must be adequate to the static loads indicated in the table below.
Power (kVA)
Weight (kg)
Static load (kg/m
20 OMD10073 REV. D
Installation and start-up of UPS Keor Hp 60-160kVA
Installation et démarrage de l'UPS Keor Hp 60-160 kVA
Installazione e avviamento UPS Keor Hp 60-160kVA
60
60
570
2
) 948
80 100
815
825
70
80 100
600 625
998 1040
125 160
125 160
660 715
1098 1190