Download Print this page

Advertisement

Quick Links

BH TREADMILL
BT7535

Advertisement

loading
Need help?

Need help?

Do you have a question about the BT7535 and is the answer not in the manual?

Questions and answers

Summary of Contents for BH FITNESS BT7535

  • Page 1 BH TREADMILL BT7535...
  • Page 2 g: MP3 port. ELEMENTS OF THE MONITOR.- A: This display gives a simultaneous H: ECO key readout of Time; Programs; Speed; Distance; Incline; Pulse rate and I: USB port. Calories. START/STOPING.- B: Incline function quick access keys Plug the unit into a wall socket with an or buttons (-1- 0- 15- 30- 35).
  • Page 3: Eco Function

    CHANGING FROM KILOMETRES For programs P1 to P36 you can specify the duration of the exercise TO MILES.- between (5 to 99) minutes. This machine has the option to display speed in km/h or mph. Program graphics for P1 to P36. The factory setting for the machine is See7-9 pages.- km/h.
  • Page 4: Body Fat Program

    With the machine ready, press the Lastly, introduce program time (5-99 PROGRAM key and U01 will appear minutes) or pulse START to begin on the display, by pressing the workout. PROGRAM key you can access the E.g. If you have specified 100 B.P.M user program, once you have chosen (Beats Per Minute) then the machine will a program press the MODE key and...
  • Page 5 BODY TYPE There are 9 body types based on the EMERGENCY STOP.- For the user’s maximum safety, this percentage of fat calculated. TYPE 1 (5%-9%) Extremely athletic unit is equipped with a safety key and TYPE 2 (10%-14%) Ideal sportsman a STOP button.
  • Page 6 Important: change appear after a few seconds. The heart inclination level of your treadmill by symbol beside the pulse rate value will propping it up on objects. flash in time with your heart rate. IMPORTANT: INCLINATION IMPORTANT: This is not a medical LEVEL MUST BE AT ITS LOWEST appliance and therefore the heart rate SETTING...
  • Page 7 FAULT FINDING CHART PROBLEM CHECKS SOLUTIONS 1.The monitor does not 1) Make sure that the 1) Plug the machine into the switch on. machine is plugged in, the mains supply. Set the switch to ON/OFF switch in position 1 position 1 and insert the safety and that the safety key is key.
  • Page 8 Program graphics...