Toshiba B-EP2DL Series Option Installation Manual page 19

INSTALLATION PROCEDURE FOR OPTIONAL EQUIPMENT
7. Connect the FPC cable to the Bluetooth module.
8. Pass the FPC cable through the slot, as shown in the picture. (B-EP4D model only)
9. Connect the FPC cable to the connector CN301 on the Main PC board.
Main PC Board
10. Fit the Bluetooth module into the following position.
B-EP4D
NOTE: Pass the FPC cable and the ground wire so that they do not get caught on the gears or
by the cover.
Bluetooth
Module
FPC Cable
Bluetooth Module
3- 4
3. Bluetooth Module: B-EP700-BLTH-QM-R
Connector CN301
FPC Cable
B-EP2D
EO15-33005
Slot
Bluetooth Module