Toshiba B-EP2DL Series Option Installation Manual page 22

INSTALLATION PROCEDURE FOR OPTIONAL EQUIPMENT
13. Mount the right side cover to the printer while fitting the tabs on the right side cover into the slots of
the printer enclosure.
B-EP4D Series: Fit the tabs A to C into the slots A' to C'.
Tab C
B-EP2D Series: Fit the tabs A to C into the slots A' to C'.
Tab C
NOTE: It is easy to mount the right side cover if you fit the tabs from the LCD side in order, then
secure the bottom side.
reassembling.
14. Close the top cover and load the battery pack. Configure the Bluetooth module settings in the system
mode with reference to the Service manual or Key Operation Specification.
In addition, about Bluetooth Module Setting by Printer Setting Tool, please refer to Printer Setting
Tool operating Specification.
Tab B
Tab A
Tab B
Tab A
Be careful not to catch the cable by the cover while
A'
A'
3- 7
3. Bluetooth Module: B-EP700-BLTH-QM-R
B'
C'
B'
Right Side Cover
EO15-33005
C'