Page 1
8 0 2 7 9 0 8 2 2 8 6 8 0 ARM AUTOMATIONEN FUER FLUGELGITTERTIRE AUTOMATIZACIONES A BRAZO PARA PORTONES CON BATIENTE AUTOMATIZAÇÕES DE BRAÇO PARA PORTÕES DE BATENTE VIRGO ISTRUZIONI D'USO E DI INSTALLAZIONE INSTALLATION AND USER'S MANUAL INSTRUCTIONS D'UTILISATION ET D'INSTALLATION...
Correct controller operation is only ensured when the data contained ATTENTION! The VIRGO model controller is not equipped with mechanical in the present manual are observed. The company is not to be held responsible for any damage resulting from failure to observe the torque adjustment.
The irreversible polarised as indicated in Fig.16. electromechanical gearmotor keeps the gate locked in the closing and At the time of installing the VIRGO BAT Kit, check that the safety devices opening positions. are connected correctly.
Page 4
(VIRGO-SQ) are preset for fitting to the right leaf, as menu scrolling/value reduction key illustrated by the example given in Fig.11.
Page 5
The transmitters can only be memorised using the appropriate Radio Activates automatic closing menu. OFF Excludes automatic closing 3 Steps (3 step) [ OFF ] 10.3) RADIO MENU (RADIO) Enables 3-step logic. A Start impulse has the following effects: 18 - VIRGO Ver. 04...
Page 6
UNIRADIO to the LINX control panel, using the UNIFLAT and During this phase, it is important to avoid obscuring the photocells, as well UNIDA accessories as indicated in Fig. 18. as using the START, STOP or PED commands and the display. VIRGO Ver. 04 -...
For further information, refer to the specific instructions for the release device. 19) VIRGO BAT KIT INSTALLATION Fix the SBS board on the back of the panel box by means of a screw, as indicated in Fig.14. Fix the board protection box (Fig.14 - “C”) supplied with the kit.
3 step ibl open [off] [off] fast cls [off] Fotoc. open [off] TEST PHOT [off] SCA 2ch [off] i Mot ON FOLLOWING MENUS [off] BLOC persist FIG. B [off] Preal [off] fixed code [on] radio prog VIRGO Ver. 04 -...
Need help?
Do you have a question about the VIRGO and is the answer not in the manual?
Questions and answers