Advertisement
Inserting the microSD Card
Insert the microSD card into the USB Stick, as shown in the following image.
Note:
The microSD card is an optional accessory. If it is not provided in the package, you can
buy one yourself.
Ensure that the bevelled edge of the SIM/USIM card is properly aligned with that of the
SIM/USIM card slot and the microSD card is inserted according to the directions on the
microSD card slot.
Do not remove the microSD or SIM/USIM card when the card is in use. Otherwise, the
card as well as your USB Stick may become damaged and data stored on the card may
be corrupted.
Using Your USB Stick
The procedure for installation depends on your computer's operating system. The
following sections are for Windows OS.
Connecting to a Network
1. Insert the USB Stick into one of your computer's USB ports.
The computer identifies the new hardware and begins installation automatically.
2. When installation is complete, the USB Stick's web management page is displayed and
the USB Stick connects to the network automatically. The USB Stick's web management
page will be automatically displayed every time the USB Stick is inserted into the
computer.
Note:
If the computer does not automatically begin installing the USB Stick, find the
AutoRun.exe file in the USB Stick's root directory, and double-click the file to run it.
If you are not connected to the network, access http://192.168.1.1 to check the
device's status.
If you cannot access http://192.168.1.1, disconnect other network connections, such as
an Ethernet or Wireless Fidelity (Wi-Fi) connection, remove and then insert the USB Stick,
or restart the computer.
Disconnecting from a Network
Remove the USB Stick from the computer.
Note:
If you do not need to connect to a network, it is recommended that you remove the USB
Stick from your computer to eliminate unwanted data traffic.
Viewing Service Information
Visit http://192.168.1.1 to view your service information.
Version: V100R001_01
LTE is a trademark of ETSI.
Part Number: 3101XXXX
Advertisement
