Connection - Teletype Bluetooth GPS Receiver User Manual

5. Tap OK to exit the screen. Follow instructions from the next section to connect your PDA with your
Bluetooth GPS receiver.
1.3.2

Connection

To set up a connection between your host device (PC, PDA, etc.) and the TeleType Bluetooth GPS
Receiver, read the following instructions.
1. Turn on the power to your host device and your Bluetooth GPS receiver. Once the Bluetooth
receiver is turned on, the LEDs will appear as shown:
2. Activate Bluetooth on your host device. If the Bluetooth icon on the bottom right-hand corner of
the Today screen is gray, you will need activate Bluetooth. Tap on the icon, and a pop-up menu
will appear in the display. Select Turn Bluetooth On. The color of the Bluetooth icon will change
from gray to blue, signifying that it is turned on.
© 2003 TeleType GPS
The PDA and Bluetooth GPS receiver are now paired!
LED Indicator Symbol
Blue
Green
Red
Bluetooth GPS Receiver
Activity
Flashing every one second
Constant On
No light (if fully charged)
8