Table of Contents
Advertisement
13
TeleType GPS Manual
5.
Go to Tools > GPS Status > Status tab. You should see symbols scrolling up the gray box in the
center.
Note: If you do not see any activity on this screen, make sure your host device is set to the correct
time zone. (If you're not sure, select the Time button and adjust your settings.) Then tap Find
GPS Port. After a few seconds, you will be brought to the Bluetooth Browser screen. Pick the
TeleType icon and tap OK. You will then be brought back to the GPS Status screen telling you
that a GPS port has been found. Tap OK.
© 2003 TeleType GPS
Advertisement
Table of Contents
Need help?
Do you have a question about the Bluetooth GPS Receiver and is the answer not in the manual?
Questions and answers