Table of Contents
Advertisement
1.2.7
Battery Charging Contact
Provides in-unit charging of batteries when the Bluetooth GPS receiver is placed in the included
charging stand. Please read the section entitled
the charging stand.
1.3
Operation Guide
Before using the TeleType Bluetooth GPS Receiver, make sure to prepare following:
TeleType GPS software is properly installed on your Bluetooth-enabled device
·
·
The Bluetooth GPS Receiver is fully powered and operational.
Check that the Bluetooth GPS Receiver is ON in the host.
·
This section will outline the procedures necessary for the Bluetooth GPS receiver to run smoothly with
the TeleType GPS software.
1.3.1
Pairing Your Bluetooth Device
Before you can connect your PDA to your Bluetooth GPS, you will need to pair them, in order to ensure
a successful connection and operation.
To pair your PDA to your Bluetooth GPS receiver:
1. Tap on the Bluetooth icon at the bottom right-hand corner of your screen and select Bluetooth
Manager.
2. On the next screen, go to Tools > Paired Devices.
© 2003 TeleType GPS
Recharging the Batteries
Go to Bluetooth Manager
Bluetooth GPS Receiver
for more information about
6
Advertisement
Table of Contents
Need help?
Do you have a question about the Bluetooth GPS Receiver and is the answer not in the manual?
Questions and answers