When Connecting S-2416 Units To One Another - Roland Digital Snake S-2416 Owner's Manual

Connecting REAC Devices

When Connecting S-2416 Units to One Another

NOTE
Change the setting of the [REAC MODE] switch and [MODE] switch while the S-2416 is powered down.
Slave-unit settings
[REAC MODE] switch
[MODE] switch
1 REAC SLAVE MODE
2 REAC BACKUP MODE
6 AES/EBU OUTPUT
Audio signals input via INPUT 17 through 24 on the master unit are
output from AES/EBU OUTPUT on the slave unit.
16
S-2416: Slave
Setting
S (Slave)
Setting
OFF CLOCK SLAVE
OFF BACKUP
ON 17-24
S-2416: Master
Master-unit settings
[REAC MODE] switch
[MODE] switch
2 REAC BACKUP MODE
6 AES/EBU OUTPUT
Audio signals input via INPUT 17 through 24 on the slave unit are
output from AES/EBU OUTPUT on the master unit.
Setting
M (Master)
Setting
OFF BACKUP
ON 17-24