Set Alarm Timer; Set Alarm; Activate/Deactivate Alarm Timer - Philips PR702 User Manual

4

Set alarm timer

Set alarm

You can set two alarms to ring at different time.
Note
• Make sure that you have set the clock correctly.
• You can only set the alarm in standby mode.
1
In standby mode，press and hold ALARM1
or ALARM2 for more than 2 seconds to
activate alarm setting mode, clock digits
buzz icon ( ) and alarm icon (
on the display will flash.
2
Press the - or + button to adjust the hour.
Press ALARM1 or ALARM2 to confirm and
the minutes digits on the display will flash.
3
Press the - or + button to adjust the minutes.
Press ALARM1 or ALARM2 to confirm
4
Press ALARM1 or ALARM2 repeatedly
to select alarm source:
Buzzer ( ) on
•
Bluetooth music ( ) on
•
Cancel alarm
•
Tip
•
The alarm volume is not adjustable, but it will go up
gradually to gently wake you up.
•
If the alarm if set to Bluetooth music but no Bluetooth
device is detected, the alarm will default to buzzer.

Activate/deactivate alarm timer

• In standby mode, press ALARM1 or ALARM2
to view the current alarm settings.
• Press ALARM1 or ALARM2 again to activate
or deactivate the alarm timer.
or
and disappears if it is off.
• To stop the alarm, press the
corresponding ALARM1 or
ALARM2 buttons.
• To stop the ringing alarm, press the
corresponding ALARM1/ALARM2.
The alarm repeats itself in
subsequent days.
Snooze the alarm
When the alarm goes off, press SNOOZE.
The alarm snoozes and repeats
ringing nine minutes later.
or )
appears if the alarm timer is on
7 EN