Set Alarm Timer; Set Alarm; Activate/Deactivate The Alarm Timer - Philips TCJ330 User Manual

4 Set alarm timer

Set alarm

Note
•
Make sure that you have set the clock correctly.
1
Press MODE to activate alarm setting
mode.
» The current alarm time (if set) is
displayed.
2
Press and hold SET for 2 seconds.
» The hour digits blink.
3
Press / to adjust the hour.
4
Press SET to confirm.
» The minute digits blink.
5
Repeat steps 3 to 4 to set the minute.
6
Repeat steps 3 to 4 to set the alarm
source. (Fig. )
f
» The alarm is set, and then the current
time is displayed.
EN
5
Alarm Indication
Low-level vibration
High-level vibration
Buzzer
Both Buzzer and vibration
Tip
•
You cannot adjust volume manually.
•
While the alarm clock vibrates, the vibration will start
slowly and gradually become faster in the first two
minutes.
Activate/deactivate the alarm
timer
To activate the alarm timer, switch ALARM to
ON.
» The alarm icon and source are displayed.
» All the buttons except SNOOZE/LIGHT
are locked. To change any settings, switch
ALARM to OFF first.
To deactivate the alarm timer:
Switch ALARM to OFF. (Fig. )
e
AL ARM
/ ON OFF
Alarm Alarm
Icon Duration
15 min
15 min
15 min
15 min