Table of Contents
Advertisement
6712SR Refrigerated Sampler
Section 4 Standard Programming
Table 4-4 Programming Example With 730 Module Installed
MODULE INSERTED---
DOWNLOAD DATA NOW
OR LOSE ALL DATA!
1
DONE
6712 SAMPLER
STANDARD PROGRAMMING
2
For HELP at any
screen press ? key.
RUN
PROGRAM
3
VIEW REPORT
OTHER FUNCTIONS
SITE DESCRIPTION:
"FACTORY051"
4
CHANGE?
YES NO
SELECT UNITS FOR
FLOW RATE:
cfs gps gpm Mgd
5
lps m3s m3h m3d
SELECT UNITS FOR
FLOW VOLUME:
6
cf gal Mgal
m3 lit
PROGRAM MODULE?
7
YES
NO
4-30
Most Teledyne Isco accessories and interfacing equipment are
not certified for us in hazardous locations as defined by the
National Electrical Code. Check applicable guidelines, codes,
and regulations of federal, state, city, and county agencies.
Refer to Appendix C in the back of this manual for more safety
information.
With the sampler off, insert the module in the bay on the controller.
Turn the sampler on by pressing the
Download stored data, if you want to keep it. Pressing DONE erases it and
advances to the next screen.
This screen will now appear for 8 seconds.
The option PROGRAM will be blinking. Press
The option NO will be blinking. Press
For the purposes of this example, it isn't necessary to change the
description.
Select the desired units for the flow rate. For this example, choose cfs.
↵
Press
.
Select the desired units for the flow volume. For this example, choose Mgal.
↵
Press
.
Select YES to program the module.
CAUTION
↵
On/Off
key. Press
.
↵
.
↵
.
Advertisement
Table of Contents
