Table of Contents
Advertisement
Trace Oxygen Analyzer
2 PWD: Used to establish password protection or change the
existing password.
3 LOGOUT: Logging out prevents unauthorized tampering with
the analyzer settings.
4 VERSION: Displays Manufacturer, Model, and Software version
of the instrument.
5 SELF-TEST: The instrument performs a self-diagnostic routine
to check the integrity of the power supply, output boards and
amplifiers.
6 SPAN: Set up and/or start a span calibration.
7 ZERO: start a zero calibration.
8 ALARMS: Used to set the alarm setpoints and determine
whether each alarm will be active or defeated, HI or LO acting,
latching or not, and failsafe or not.
Figure 4-1: Modes and Functions
Teledyne Analytical Instruments
Operation 4
Contrast Function is DISABLED
(Refer to Section 1.6)
4-3
Advertisement
Table of Contents
