Table of Contents
Advertisement
MIX 56 User Manual
MIX 56 by Telect
Card Select: Active
Alarm Details
----- ---------------------------------------------------- ------------------
Crt
Mjr
Mjr
Mjr
Mjr
Mjr
Mjr
Mjr
Mnr
122188-10 A0
Telect, Inc.
Step
Action
1.
From the Directory screen, press 16 to select Current Alarms, then
Enter.
The Current Alarms screen appears:
multiple low speed failures
LS-02(Low Speed 02),LOS
LS-03(Low Speed 03),LOS
LS-01(Low Speed 01),Rx AIS
15 min. ES LS threshold crossed
15 min. SES LS threshold crossed
24 hr. ES LS threshold crossed
24 hr. SES LS threshold crossed
backup power B failed
2.
Tab to "Card Select" and press the spacebar to toggle between "Ac-
tive" and "Standby". Press Enter.
3.
To view the next 14 entries, tab to [Next] and press Enter.
4.
To view the previous 14 entries, tab to [Previous] and press Enter.
5.
To engage or disengage the ACO, tab to the button below the Time
Remaining field and press Enter. If the ACO is engaged, the button
that appears is [Disengage ACO]. If the ACO is disengaged, the
button that appears is [Engage ACO].
To View the Alarm Log
You can view a history of alarms in the Alarm Log, a screen that displays
the last 99 alarm entries. An entry is made in the Alarm Log when an alarm
is triggered, and again when it is cleared.
Each page in the Alarm Log contains up to11 entries that show the date and
time each alarm started or ended, the type of alarm, and a detailed explana-
tion of the alarm. You can move forward or backward through the pages,
and when finished viewing alarms, you can clear the entire log.
system 2
Current Alarms - Active
-----------------------
Page: 1
4 Software Operation
Directory (Ctrl+D)
Help (?)
Alarm Cutoff: Disengaged
Time Remaining: 00:00
[Engage ACO]
Start Date / Time
22/Oct/03 07:37:35
22/Oct/03 07:37:35
22/Oct/03 07:15:02
22/Oct/03 07:14:49
22/Oct/03 07:16:04
22/Oct/03 07:14:56
22/Oct/03 07:29:59
22/Oct/03 07:29:59
22/Oct/03 07:13:00
[Next]
[Previous]
4-41
Advertisement
Table of Contents
