Table of Contents
Advertisement
MIX 56 User Manual
122188-10 A0
Telect, Inc.
Step
Action
1.
From the Directory screen, type 10 to select Update Flash and
press Enter.
The Update Flash screen appears.
2.
Tab to the [Program Transfer] button and press Enter.
A warning screen appears asking you to confirm updating the
standby card flash.
If you get an error message saying no standby card has been detect-
ed, you cannot use this procedure—you need to use "Serial Load"
as described in "Craft Port Update."
3.
Type y and press Enter.
The message, "Flash update in process...please wait" appears on the
Transfer Program to Standby Card line. When the process is com-
plete, the message changes to "***Flash update successful***".
5 Owner Maintenance
NOTE
5-15
Advertisement
Table of Contents
