LG Therma V Series Installation Manual page 83

Code Item
2A Function
Description
Value #1 Note
Default
Range
Value #2 Note
Default
Range
2B Function
Description
Value #1 Note
Default
Range
Value #2 Note
Default
Range
Value #3 Note
Default
Range
2E Function
Description
Value #1 Note
Default
Range
2F Function
Description
Value #1 Note
Default
Range
Function
42
Description
Default
Range
Note: Some contents may not be displayed depending on DIP switch setting in the main PCB assembly 1.
Miscellaneous setting
Determine electric heater and water heater on and off
00: Operate both electric heater and Domestic hot water tank heater
01: Operate only Domestic hot water tank heater
Domestic hot water heating timers
Determine following time duration : operation time of Domestic hot
water tank heating, stop time of Domestic hot water tank heating,
and delay time of sanitary tank heater operating.
This time duration defines how long time Domestic hot water tank
heating can be continued.
5 ~ 95 min (step: 5 min)
This time duration defines how long time Domestic hot water tank
heating can be stopped. It is also regarded as time gap between
Domestic hot water tank heating cycle.
0 ~ 600 min (step: 30 min)
This time duration defines how long time Domestic hot water tank
heater will not be turned on in Domestic hot water heating operation.
20 ~ 95 min (step: 5 min)
Changing thermal on / off room air temp
Select Thermal on / off Temperature gap.
Thermal on
0 -0.5 °C
1 4 °C
2 2 °C
3 -1 °C
Changing thermal on / off leaving water Ten
Select Thermal on / off Temperature gap.
Thermal on
0 -2 °C
1 -6 °C
2 -2 °C
3 -1 °C
Setting mode lock function
Mode-lock is can operate only cooling
00 (Not use Mode-lock)
Detail
00
00 ~ 01
Not used
-
-
30 min
180 min
20 min
Thermal off
1.5 °C
6 °C
4 °C
1 °C
0
0 ~ 3
Thermal off
2 °C
4 °C
4 °C
1 °C
0
0 ~ 3
00~01
System Set-Up
Remark
Installation Manual 83