Sanyo FXC-503LD Operating Instructions Manual page 9

REPEAT MODE . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Repeating tracks . . . . . . . . . . . . . . . . . Press button @to play the current track repeatedly.
l
Repeating discs . . . . . . . . . . . . . . . . . Press button @I again to play the current disc repeatedly.
l
To cancel this mode, press button @I again.
The system will remain in this mode until it is cancelled.
Normal Play Mode
(Repeat Mode Cancelled)
Note
To return from the trackrepeat mode directly to the normalplay mode, press button@ twice
successively. If an interval exists after pressing once, the unit will go into the disc repeat
mode and you have to wait for several seconds before pressing again.
SELECTING A CD CHANGER . . . . . . . . . . . . . . . 9 *
A second CD changer can be added by using a divider unit (FTP-CHlS).
Press button @ to select the desired CD changer. (CDlICD2)
Note
If only one CD changer is installed, button @I is not effective.
FXC-503LD
Note
When two CD changers are connected, set the select button 6f one CD changer to 1 and
the other to 2. The select button is located on the CD changer body
Do not assign the same number to both changers.
For detailed instructions, refer the instructions supplied with the FXD-Cl 00 or FXD4200.
6 discs can be stored.
CD Changer 1
CD Changer 2