Advertisement
250-300 SE/R
Electrical system maintenance (continued)
REPLACING THE MAIN FUSE
REPLACING THE FUSE FOR THE LIGHTS (250-300 SE/R)
REMOVING THE HEADLIGHT HOUSING
1
2
124
1
1
Remove the seat (
☛
The main fuse
is on a relay by the starter.
1
Remove the defective fuse and replace with a
new fuse of the same value.
Main fuse 30A
Put a new spare fuse in the reserve location in
the fuse box.
- Replace the saddle (
Remove the seat (
☛
The light fuse
is located in a high location on
1
the wiring harness on the right side of the bike.
Remove the defective fuse and replace with a
new fuse of the same value.
Light fuse 15A
- Replace the saddle (
Turn the ignition to the off position.
Unclip the left and right rubber fastners
each side of the fork.
Separate all of the brake hoses / cables from the
meter bracket at the top and bottom.
Move the top plate up to clear the housing.
Disconnect the connector
theheadlight housing.
p.100)
p.100).
☛
p.100)
p.100).
☛
1
and remove
2
on
Advertisement
