Download Print this page

Cooling System - DEFYGRAVITY SHERCO 250-300 SE/R Manual

Advertisement

250-300 SE/R

Cooling System

SERVICING THE COOLING SYSTEM
1
Motorcycle horizontal
86
ATTENTION
- The hot liquid can cause severe injuries.
- The coolant is harmful
- After contact with skin or eyes, or ingestion, or
injuries caused by hot liquids: Consult a physician
- Use protective gloves.
- Do not replace the coolant with water or other not
approved fluids: it could damage your engine.
- Follow these procedures carefully and always fill the
engine with coolant when the engine is cold.
- Place the bike upright on a horizontal surface.
- Remove the cap
1
Fill the radiator full so that there is no air in the
system.
Approved
Coolant
Replace the screw
2
Radiator
Bleed screw
Fill the coolant to the top of the radiator.
Replace the cap
and check to make sure it is
1
tight.
ATTENTION
It is important to follow this procedure.
The lack of fluid, or the presence of a pocket
of air left in the radiator can cause
serious damage to the engine.
.
Minerva Perma Universal
D 4 seasons -25°C
.
M6X8
8Nm

Advertisement

loading