DURAVIT Sensowash D-Code Operating Instructions Manual page 46

Self-cleaning of the spray wand
> Press the "Up" and "Down" buttons of the "Spray wand position" button <
together for 3 seconds.
Cleaning of the spray wand is performed.
> Press the "Stop" or "Power" button while the spray wand is being cleaned.
The current function is terminated immediately.
The spray wand retracts during this time.
Cleaning water comes out of the nozzle while the spray wand is being cleaned.
Manual cleaning
Note!
Damage to the product due to incorrect cleaning!
If too much pressure is exerted on the spray wand while it is being cleaned, it may
stop functioning or fracture.
Cleaning the seat unit
Use a neutral cleaning agent on a soft cloth or sponge to clean the seat unit.
Note!
Damage to the product due to incorrect cleaning!
Never use abrasive, aggressive or chemical cleaning agents to clean the seat unit. Do
not clean the seat unit with a rough brush or abrasive cleaning agents. These could
cause deformation or damage to the product.
46
>
7