Setting The Position Of The Spray Wand; Adjusting The Water Pressure; Adjusting The Water Temperature - DURAVIT Sensowash D-Code Operating Instructions Manual

7.5

Setting the position of the spray wand

> Press the "up" or "down" button of the "Spray wand position" button <
the control panel. You can now set the spray wand to the suitable position.
The spray wand can be set to 5 different positions.
This setting can be made while the function "Rearwash" or "Ladywash" is ac-
tive. The position of the spray wand can be adjusted to suit the users preferences.

7.6 Adjusting the water pressure

> Press the "+" or "-" buttons or the "Water pressure and temperature adjustment"
button < 6 > on the control panel.
You can now adjust the water pressure as desired.
The water pressure can be set individually to 3 different levels.
When this button is pressed, the LED with the set water pressure always lights
up.
7.7

Adjusting the water temperature

> Press the "Water temperature" button <
You can now adjust the water temperature as desired. The water temperature can
be set to various levels by pressing the "Water temperature" button <
edly.
> on the control panel.
1
EN
7 > on
1 > repeat-
43