Upgrading To Intel Xeon E5-2600 V4 Cpus - Cisco UCS B200 M4 Servicing Manual

Servicing a Blade Server
Figure 6: FlexStorage Module
Step 3 Using a Phillips-head screwdriver, tighten the four screws to secure the FlexStorage module. The locations
of the screws are labeled "Secure Here."

Upgrading to Intel Xeon E5-2600 v4 CPUs

Before upgrading to Intel Xeon E5-2600 v4 Series CPUs, ensure that the server is running the required
minimum software and firmware versions that support Intel E5-2600 v4 Series CPUs, as listed in the following
table.
Software or Firmware
Cisco UCS Manager
Cisco IMC
BIOS
Note Cisco UCS Manager Release 2.2(4) introduced a server pack feature that allows Intel E5-2600 v4 CPUs to
run with Cisco UCS Manager Release 2.2(4) or later, provided that the Cisco IMC, BIOS and Capability
Catalog are all running Release 2.2(7) or later.
Caution
Ensure that the server is running the required software and firmware before installing the Intel E5-2600 v4
Series CPUs. Failure to do so can result in a non-bootable CPU.
Minimum Version
Release 3.1(1e) with 3.1(1g) ucs-catalog.3.1.1g.T.bin, or Release
2.2(7b) (See the following Note for additional supported versions.)
Release 3.1(1g) or Release 2.2(7b)
Release 3.1(1g) or Release 2.2(7b)
Upgrading to Intel Xeon E5-2600 v4 CPUs
Servicing a Blade Server
9