Upgrade And Servicing-Related Parts; Drive And Blade Server Blanking Panels; Upgrading Your Server From Intel Xeon E5-2600 To Intel Xeon E5-2600 V2 Cpus (Or Downgrading From Intel Xeon E5-2600 V2 To Intel Xeon E5-2600 Cpus) - Cisco UCS B200 M3 Spec Sheet

Upgrade and Servicing-Related Parts

This section lists the upgrade and servicing-related parts you may need during the life of your server. Some
of these parts are configured with every server or with every UCS 5108 blade server chassis, and some may
be ordered when needed or may be ordered and kept on hand as spares for future use. See
Table 29 Upgrade and Servicing-related Parts for UCS B200 M3 Server
Spare Product ID (PID)
N20-BBLKD=
N20-CBLKB1=
UCSB-HS-01-EP=
UCSB-BAFF-B200-M3=
N20-MBLIBATT=
N20-BKVM=
UCS-CPU-EP-PNP=
UCS-CPU-EP2-PNP=
UCS-CPU-GREASE=
UCSX-HSCK=
Notes...
1. This part is included/configured with your UCS server (in some cases, as determined by the configuration of
your server).
2. This part is included/configured with the UCS 5108 blade server chassis.
3. This part is included with the purchase of each optional or spare Intel Xeon E5-2600 CPU processor kit.
4. This part is included with the purchase of each optional or spare Intel Xeon E5-2600 v2 CPU processor kit.

Drive and Blade Server Blanking Panels

A drive blanking panel (N20-BBLKD=) must be installed if you remove a disk drive from a UCS server.
Similarly, a blade server blanking panel (N20-CBLKB1=) must be installed if you remove a half-width blade
server (such as a UCS B200 M3 server) from a blade server chassis. These panels are required to maintain
system temperatures at safe operating levels, and to keep dust away from system components.
Upgrading your Server from Intel Xeon E5-2600 to Intel Xeon E5-2600 v2 CPUs (or
downgrading from Intel Xeon E5-2600 v2 to Intel Xeon E5-2600 CPUs)
See the following link:
http://www.cisco.com/en/US/docs/unified_computing/ucs/hw/CPU/IVB/install/IVB-B.html
Cisco UCS B200 M3 Blade Server
Description
2.5-inch HDD Blanking Panel
Blade slot blanking panel for UCS 5108/single slot
CPU Heat Sink for UCS B200 M3 and B420 M3
Air Baffle Replacement Kit for B200 M3 Server
Replacement Lithium Battery for Server Motherboard (CR2032)
KVM local IO cable for UCS servers console port
Pick n place CPU tools for M3/EP 10/8/6/4/2 core CPUs (Green)
Pick n place CPU tools for M3/EP v2 12 core CPUs (Purple)
Thermal grease-for 2 CPUs-all but C220/C240-Blue tip syringe
UCS Processor Heat Sink Cleaning Kit (when replacing a CPU)
1
2
1
1
2
SUPPLEMENTAL MATERIAL
Table 29.
1
3
4
3
3
45