2. Meter operation a. Meter instruction Meter operation Operating instructions To switch on/off the E-Bike Press “+”, its level Press “+” again, its level Change Electric Function: system, hold the MODE “Mid”. “High”. Level “High” is Press”-“, until the button for 2s. The default the maximum power of “low””Mid””High”...
Page 3
For handling and maintenance of the bicycle, please refer to the E-BIKE User Manual which is an integral part of this e-bike User manual! 4. Do not at any time dismantle or disassemble any of the above e-bike components! 5. Please check all parts are tighten and locked before riding.
Page 4
5. Installation Instruction When open the bike's carton box, take out E-bike and use scissors to cut off the package strings. 1.Install the handlebar: use inner hexagon tool loosen the stem cover and don't not tighten all bolts immediately before adjusting the handlebar in a property angel and position, then tighten.
Page 5
2. Install front wheel: take out a protection plate of the front fork and front hub, then take out front wheel b: install the Front fender and lamp, then used tool to tighten c:make sure sed tool to tighten(left front wheel is in line with the rear wheel and proceed to install and u and right) 3.
Need help?
Do you have a question about the E-bike and is the answer not in the manual?
Questions and answers