Kit Contents Assembly Hardware: (1) Base (1) Slide (1) Strap (4) Drywall Anchors with Screws (2) Foam Strips PC Wall Mount Installation Instructions Step 1. Determine Location: Select appropriate location on wall. Consider cable routing and length. Step 2. Mark Hole Positions: Hold base in position and mark 4 hole positions with pencil. Page 2...
Installation Instructions Step 3. Install Drywall Anchor: Install one drywall anchor at each hole mark. Using a #2 Phillips head screwdriver press the anchor into the drywall while turning clockwise until it is seated flush with the wall. Step 4. Attach Mount Base: Attach base to wall using the 4 screws provided.
Page 4
RackSolutions .com Installation Instructions Step 6. Thread Strap Through Mount: Attach slide to base. Remove male fastener from strap. Thread strap between slide and base through holes as shown. If PC width is less than mounting area of base use nearest strap hole to outer side of PC.