Web Server Configuration - Waveshare RS485 TO ETH User Manual

RS485 TO ETH

3.2. WEB SERVER CONFIGURATION

User can connect PC to RS485 TO ETH through LAN port and enter web server to configure. Web
server default parameters as follow:
Parameter
Web server IP address
User name
Password
After firstly connecting PC to RS485 TO ETH, user can open browser and enter default IP 192.168.0.7
into address bar, then log in user name and password, user will enter into web server. Web server
screenshot as follow:
Table 2 Web Server Default Parameters
Figure 21 Web Server
Default settings
192.168.0.7
admin
admin