Httpd Client - Waveshare RS485 TO ETH User Manual

RS485 TO ETH
User can set RS485 TO ETH in UDP Server mode and related parameters by setup software or web
server as follows:
Figure 9 UDP Server

2.2.5. HTTPD CLIENT

In HTTPD Client mode, RS485 TO ETH can achieve data transmission between serial port device and
HTTP server. User just need set RS485 TO ETH in HTTPD Client and set the HTTPD header, URL and
some other related parameters, then can achieve data transmission between serial port device and
HTTP server and don't need care about the HTTP format of data.