SIM7000E NB-IoT HAT User Manual
4.1.
General AT commands ...................................................................................................... 12
4.2.
GPS Debugging................................................................................................................... 12
5.
Using with Raspberry Pi ................................................................................................................. 14
5.1.
Interface overview ............................................................................................................. 14
5.2.
5.3.
5.4.
Examples ............................................................................................................................ 16
5.4.1.
AT_Test ................................................................................................................. 16
5.4.2.
GPS_Positioning .................................................................................................... 17
5.4.3.
NB-IoT (TCP_IP) ..................................................................................................... 18
5.4.4.
1.
Hardware configuration
1.1.
Hardware configuration
This module comes with GSM antenna, GPS antenna and micro USB cable. Besides these you should
prepare a sim card or a nb-iot card:
1)
Insert the SIM card to the card slot and connect the GSM antenna.
2)
Connect the USB interface of SIM7000E NB-IoT HAT to PC with a micro USB cable. Then the PWR
indicator will keep bright.
Figure : Hardware connnection
Rev1.0 June 8, 2018
share awesome hardware
4