Udp Server - Waveshare RS485 TO ETH User Manual

RS485 TO ETH
In UDP Client mode, if user set remote IP as 255.255.255.255, RS485 TO ETH can broadcast to entire
network segment and receive broadcast data. After firmware version 4015, 304 support broadcasting
in same network segment.(Such like xxx.xxx.xxx.255 broadcasting way).
User can set RS485 TO ETH in UDP Client mode and related parameters by setup software or web
server as follows:
Figure 8 UDP Client

2.2.4. UDP SERVER

In UDP Server mode, RS485 TO ETH will change target IP every time after receiving UDP data from a
new IP/Port and will send data to latest communication IP/Port.