Tcp Server Setting; Non-Persistent Connection - Waveshare RS485 TO ETH User Manual

RS485 TO ETH

2.4.6. TCP SERVER SETTING

304 work in TCP Server mode allow at most 16 TCP Clients connection. Default is 4 TCP Clients and
user can change maximum TCP Clients connection by web server. When TCP Clients more than 4, user
need make every connection data less than 200 bytes/s.
If TCP Clients connected to 304 exceed maximum TCP Clients, user can enable/disable kick off old
connection function by web server.
User can set above TCP Server settings by web server as follow:
Figure 17 TCP Server Setting
2.4.7. NON-PERSISTENT CONNEC TION
RS485 TO ETH support non-persistent connection function in TCP Client mode. When RS485 TO ETH
adopt this function, RS485 TO ETH will connect to server and send data after receiving data from