Figure 5
1. Rivets
3.
Remove the hood-latch bracket from the hood.
4.
While aligning the mounting holes, position the
lock bracket and the hood-latch bracket onto the
hood
(Figure
6).
Note:
The lock bracket must be against the
hood.
Note:
Do not remove the bolt and nut from the
lock-bracket arm.
Figure 6
1. Lock bracket
5.
Align the washers with the holes on the inside of
the hood.
6.
Rivet the brackets and the washers to the hood
(Figure
6).
7.
Hook the latch onto the hood-latch bracket
(Figure
7).
g031570
2. Hood-latch bracket
g012629
2. Bolt and nut
1. Hood latch
8.
Install the bolt into the other arm of the hood-lock
bracket to lock the latch in position
Note:
Tighten the bolt securely, but do not
tighten the nut.
1. Bolt
2. Nut
13
Figure 7
(Figure
Figure 8
3. Arm of the hood-lock
bracket
g012630
8).
g012631