Front Panel Of The Player; Player Display Panel - THOMSON DTH720 Owner's Manual

2_DTH720_en 22/06/04
Connections and initial set up

Front panel of the player

1
1 ON/STANDBY
off.The indicator is green when the player
is operating and red when the player is
turned off (stand by mode).
2 - To remove a disc.
EJECT
- Stops playing a disc.
3 STOP
- Plays the next chapter (DVD) or
NEXT
4
track (CD).
5 PLAY/PAUSE

Player display panel

DVD
VCD
: Light up according to the type of disc in the player.
CD
DivX
B
: Playback in progress.
K : PAUSE mode activated.
00 : 00 : 00
: Elapsed time (hours, minutes, seconds) and chapter (DVD).
EJECT LoaD
, : Information relating to loading a disc.
STOP
: Disc in the player but play halted.
DVD : the INFO key on the remote control allows the elapsed time to be displayed as well as the chapter
number or current track number.
11:25 Page 8
- Turns the player on or
- Plays a disc.
2
6 PREV/video - Skips back to the beginning
of the chapter (DVD) or of the track
(CD) during playback, or to the beginning
of the previous chapter or track.
Note: this key also allows the video output signal
to be adjusted (RGB, YUV, YPrPb)
depending on the television set or monitor that is
connected to your player with 3
sockets or the Scart AV 1
key for 3 seconds and then select the signal by
successively pressing the key to make a selection.
The active signal is displayed in the menu of the
player alongside the Display function. The
S-video signals (Y/C) and composite video (CVBS)
remain available on sockets 2 and 3 (see
page 6) whatever selection is made
8
3 4 5
6
Component
socket. Hold down the