Table of Contents
Advertisement
2_DTH720_en
22/06/04
PAL or NTSC TV sets
If the picture on the DVD being played appear in black and white on your TV screen, the standard
of the video signals transmitted to your TV is incorrect. Change the video signal from PAL to
NTSC or vice versa.
Select PAL/NTSC then with the
PAL is the name of the colour coding system used in most European countries.
NTSC is the name of the colour coding system used in the United States and some other countries.
Scart output
See the paragraph below on Progressive Scan.
Front Display menu
Depending on the brightness of the room where you've installed your player, select one of the 4
settings to adapt the brightness of the display panel to suit its environment.
1.
If a disc is being played, press
2.
Press
to highlight Display and press
options).
3.
Press
to highlight Front Display and press
a choice of options).
4.
Use keys
your choice.
•
Always Bright,
•
Always Dim.
•
Dim for Movies (dimmed lighting during replay of a disc),
•
Off for Movies (no display during replay of a disc),
5.
To return to the player menu, press
Progressive Scan
To display images on a TV, or monitor (plasma, LCD...) equipped with a Progressive Scan
function, you must start this function on your player after having connected your TV to the 3
COMPONENT connectors (Y, Pr, Pb) of your player.
1.
If a disc is being played, press
2.
Press
to highlight Display and press
options).
3.
Press the
4.
Use the
Note: the terms YUV, COMPONENTE (COMPONENT), and Y, Pr, Pb all designate the same
function.The designation is different according to the context (video signal, type of video output, connector
names).
5.
Return to the Display menu by pressing the
6.
Use the
your selection.
7.
To return to the player menu, press the
11:26
Page 29
key choose PAL or NTSC.
OK
(the player menu appears).
STOP
or
to highlight one of the four available options and press
STOP
(the player menu appears).
key to highlight Scart output and press the
or
keys to highlight YUV and press the
or
keys to highlight Progressive Scan and press the
(The Display menu appears giving a choice of
OK
(The Front Display menu appears giving
OK
until the menu is displayed on the screen.
OK
(The Display menu appears giving a choice of
key.
OK
key to confirm your selection.
OK
key once.
key until the menu is displayed on the screen.
29
Menus
to validate
OK
OK
key to confirm
EN
EN
Advertisement
Table of Contents
