A_CS90 EN
4/28/04
9:55 AM
Radio
Selecting Tuner Band
1. Press TUNER•BAND•APP on the main unit or
tuner on the remote control to select TUNER.
2. Press TUNER•BAND•APP on the main unit or
band•app on the remote control to select
radio band.
Tips:
Your audio system has 30 preset stations.
Tuning to a Station
Press TUNING -
or +
tune
or
to select frequencies.
Manually Setting Presets
1. Press TUNING -
or tune
or
frequency.
3. Press the PROG•SET•CLEAR button once.
4. The most recently accessed program location
will be displayed.
5. If a different program location is preferred,
press PRESET STATION UP
select the desired preset number (1-30).
6. Press PROG•SET•CLEAR to store the selected
frequency at that preset.
Page 15
Auto Preset Programming
Press and hold TUNER•BAND•APP on the main
unit or band•app on the remote control to scan
stations in selected band. A maximum of 30
stations can be stored. Beware of your preset
channels being erased accidentally because the
scanning and storing process is automatic upon
pressing the button.
Press any button to stop scanning.
Accessing Preset Stations
Press PRESET STATION UP
the previous or next preset station. The
display first shows the preset program number
and after a few seconds, the frequency will be
on the main unit or
displayed. (PR 01 FM is FM preset 1)
Suppressing Stereo Signal
Press
between FM mono and stereo for stereo FM
or +
on the main unit
stations. (Remote Only)
to access the desired
or DN
to
or DN
to access
on the remote control to toggle
EN
10