A_Cs90 En 4/28/04 9:55 Am; Settings; Display; Setting The Clock - THOMSON Life CS90 User Manual

Thomson multimedia home stereo system owner's manual
Table of Contents

Advertisement

A_CS90 EN
4/28/04
9:55 AM

Settings

Display

Setting the Clock

1. Press CLOCK•TIMER once to display clock time.
2. Press TUNING -
or +
unit or tune
or
control to set the hour and then press
PROG•SET•CLEAR to shift to minute digits.
3. Press TUNING -
unit or tune
or
remote control to set the minute.
4. Press PROG•SET•CLEAR to save settings and
STOP to quit setting.
Note:
• When system is ON, you can press
CLOCK•TIMER to display the current
time for about 2 seconds.

Setting the Timer

1. Press CLOCK•TIMER twice until the ON and
clock time is displayed ( ON - timer on time ).
2. To set timer on hour, press TUNING -
+
on the main unit or press tune
on the remote control.
Page 11
3. Press PROG•SET•CLEAR to shift to minute
digits.
4. Press TUNING -
unit or press tune
remote control to set the minutes.
5. Press PROG•SET•CLEAR for source selection.
6. To select source, press TUNING -
on the main unit or press tune
the remote control. (CD or Tuner)
7. Press PROG•SET•CLEAR for volume
adjustment.
8. To select volume level, press TUNING -
or +
or
9. Press PROG•SET•CLEAR for timer off time
setting.
10.To set timer off time, Repeat step 2 to 4.
11.Press PROG•SET•CLEAR to save settings or
on the main
STOP to quit setting.
on the remote

Activating the Timer

Press and hold CLOCK•TIMER to turn the timer
or +
on the main
on/off. The timer icon
on the
when timer is activated.
or
or
or +
on the main
or
on the
on the main unit or press tune
on the remote control.
lights on the display
Note:
Timer can not be set or activated if clock
time is not set. SET CLK will flash on the
display when you try to activate the timer.
Follow instructions under "Setting the
Clock" to set clock.
If timer settings have not been entered,
SET TMR will flash on the display when you
try to activate the timer. Follow instruc-
tions under "Setting the Timer" to enter
timer settings.
If timer off time is set as the same as
timer on time, TIMER NG will flash on the
display. Set the correct timer off time
again.
EN
or +
or
on
6

Advertisement

Table of Contents
loading

Table of Contents