Programming Radio Stations - THOMSON mic100 User Manual

USING
POWER SUPPLY
Speaker connection
• Unfurl the load speaker wires and connect them to the
corresponding terminals.
Red
USING THE APPLIANCE
• Press once q of the device or twice q on the remote to
turn the appliance on: the indicator light (C) turns off.
• Press q button to turn the appliance to stand-by mode:
the indicator light (C) turns on.
COMMENTS CONCERNING TACTILE KEYS
Tactile keys react to touch under normal conditions. They
do not react to greasy or wet fingers. Always clean and dry
the surface with a soft cloth. Do not use a damp cloth or an
aggressive detergent.
TIME SETTING
In Off mode:
• Press PROG/MEM of the device or
• Press keys s and w to switch between 12 or 24-hour
display.
• Press on the PROG/MEM of the device or
remote: the display flashes.
• Set the time using the keys s and w. PROG/MEM of
the device or on the remote to confirm.
• Repeat the previous operation to set the minutes.
Downloaded From Disc-Player.com Thomson Manuals
EN 10
Black
on the remote.
on the
MICRO SYSTEM
MIC100
USING THE RADIO
• Turn the appliance on and press SOURCE to select the
« FM » function.
• Tune the radio to the desired station using keys {
and }: the frequency is displayed on the LED screen.
• Press and hold the key } to scroll through frequencies,
then release to trigger automatically on the nearest
station received.
• To turn the radio off, press the q button.
Note : For improved reception, unfurl the FM wire aerial (H)
located at the rear of the appliance.

PROGRAMMING RADIO STATIONS

Manual programming:
• Select a station to be saved.
• Press PROG/MEM of the device or MEMORY on the
remote: program mode (P- 01) is displayed.
• Press w and s keys top select a number.
• Press PROG/MEM of the device or MEMORY on the
remote, to save each station (20 maximum).
Automatic programming:
Press PROG/MEM of the device or MEMORY on the remote
for 3 seconds: programming will launch automatically and
memorize received stations.
Accessing saved stations:
• Press keys CH+ and CH- to access the saved stations.
USING THE CD PLAYER
Comment: Before first use, remove the protective cardboard
insert on the lens located in the CD compartment (B).
Move the compartment door with care.
Playing a CD:
• Press the CD compartment door and insert a CD
(printed side up).
• Close the CD compartment by hand.
• Turn the appliance on by pressing q button and press
SOURCE to select "CD" mode.
• Adjust the volume using the keys
REPEAT MODE
Press REPEAT several times.
• NORMAL: stops repeat.
• REPEAT ONE: repeats one track.
• REPEAT ALL: repeats all tracks.
• REPEAT FLD: repeat all albums (only MP3 files).
• RANDOM: playback random.
NORMAL REP ONE
NORMAL REP ONE REP ALL
and .
REP ALL RANDOM
REP FLD RANDOM