English - Ryobi EHT 4555 Operating Instructions Manual

Please read these operating instructions before using the tool for the first time and
P
ACKAGE CONTENTS
F . 1
IG
1. Safety cutter bar
2. Safety guard
3. Bow-grip with On/Off switch
4. Handle with On/Off switch
5. Pull-relief
6. Transport guard
7. Knock-on protector
T
ECHNICAL DATA
Rated voltage
Power rating
Rated no-load speed
Cutter blade distance
Length of cut
Braking time
Weight
LpA (noise)*
LWA (sounding power)
Vibration level
Rated voltage
Power rating
Rated no-load speed
Cutter blade distance
Length of cut
Braking time
Weight
LpA (noise)*
LWA (sounding power)
Vibration level
* to ears of operator
keep them with then tool at all times
EHT 4555
V/Hz 230/50
W 450
min 1500
-1
mm 24
mm 540
s < 1
kg 3,9
dB(A) 90,1
dB(A) 101
m/s 1,5
2
EHT 6060
V/Hz 230/50
W 600
min 1500
-1
mm 24
mm 630
s < 1
kg 4,1
dB(A) 92,2
dB(A) 105
m/s 1,5
2
R U
ANGE OF SE
Cutting and trimming of hedges, bushes and
ornamental shrubs in the domestic sector.
All other uses are expressly excluded.
The application of unsuitable maintenance
procedures and the use of inappropriate
components or the removal of safety
devices are extremely dangerous usages .
Pay great attention!
Before the use of the hedgetrimmer, we
recommend you to read the instructions for
use and the safety warnings.
S
AFETY INFORMATIONS
Use only suitable accessories approved
for use with the tool.
Always pull the power plug out of the
socket before working on the tool, e.g.
cleaning, removing blockages, inspection
or maintenance.
Pull the plug out immediately if the
mains or extension lead is dam-
aged or severed.Use cord and
extension cord that is defective or
damaged.
When using the tool, always make sure
that safety equipment is fitted.Never try to
use the uncomplete equipment or the unit
that has been tampered with
unauthorized modification.
For safety reasons, the socket used to
power the unit should be backed up by
aresidual current device-operated (FI)
circuitbreaker which can be tripped by a
max. current of 30mA.
Use only a water-jet-proof extension lead
approved for outdoor use (H07RN-F).
Secure extension lead by hanging it in the
pull-relief ( Fig.
Before using, inspect tool, extension lead
and plug. Have damaged parts replaced
or repaired only by a specialist.The
blades have to be substituted in pairs.
Always keep extension lead out of the
work area and lay it rearwards away
from the machine.
Always wear suitable clothing! Avoid
wearing loose clothing or jewellery, as
this can get caught in moving parts. It is
recommended to wear tight fitting gloves,
non-slip shoes, long trousers and safety
goggles.
Use always ear protection device. Wear
always boots for your safety. Wearing a
head protection is necessary when there
is the possibility of objects falling.
Tool must not be used in rain or
on wet hedges.

ENGLISH

2).
5