Topologies - Bosch FPA-5000 Networking Manual

Modular fire panel
Topology FPA-5000
Possible
Standalone
Max. 32 panels and remote keypads
Loop
Possible
Panel redundancy
Notice!
Firmware installation
Connected panels must have the same firmware version.
A firmware installation is possible for the active panel solely. For redundant panels perform
the firmware installation for both panels. To do so, you have to switch the panel roles and
switch it back after successful firmware installation.
4

Topologies

This document describes a variety of fire alarm network topologies. The topologies are
described independently of the fire panel type.
CAN loop, page 14
Ethernet loop, page 14
Ethernet loop with OPC server, page 14
Ethernet loop with OPC server to redundant
panel, page 15
Bosch Sicherheitssysteme GmbH
FPA-1200
Possible
1 panel and max. 3 remote keypads
Not possible (DIP 6 on panel
controller is not functional.)
OPC-Server
Networking guide
CAN loop with Ethernet segments, page 15
Ethernet/CAN double loop, page 15
Topologies | en 9
07.2019 | 5.9 | F.01U.247.450