Settings; Display; Showing Demonstration; Setting The Clock - THOMSON MS2200 User Manual

MS2200 EN 11/17/03

Settings

Display

EN

Showing Demonstration

Not operational in CD mode. Press
DIMMER•DEMO / CD INFO to turn on/off
demonstration mode. The demonstration scrolls
through all display operations.

Setting the Clock

1. Press and hold CLOCK/RDS until the hour
flashes on the display.
2. Press DIGITAL TUNING
the hour and then press CLOCK/RDS to shift to
minute digits.
3. Press DIGITAL TUNING
the minute.
4. Press PROG•SET to save settings and STOP
to quit setting.
Note:
• When system is ON, you can press
CLOCK/RDS to display the current time
for about 2 seconds.
• Clock can not be set in FM mode.

Setting the Timer

1. Press and hold TIMER until the ON appear
with the hour flashing ( ON - timer on time )
2. For setting time, press DIGITAL TUNING
or to set the hour and then press TIMER
to shift to minute digits.
5
1:59 PM Page 10
BASS
SURROUND
or to set
or to set
3. Press DIGITAL TUNING
the minute.
4. Press TIMER to change to OF (timer off time)
with hour flashing. Repeat steps 2 & 3 for
timer off time setting.
5. Press TIMER to select source. Press DIGITAL
TUNING or to select TUNER, TAPE or
CD.
6. Press TIMER to set volume. Press VOLUME
CONTROL up or down to set desired volume
level.
7. Press PROG•SET to save settings or STOP to
quit setting.

Activating the Timer

Press and release TIMER to turn on/off the timer.
The timer is active when the clock icon
lit.

Adjusting the Display Brightness

1. Press and hold DIMMER•DEMO / CD INFO
for more than 2 seconds.
2. While the dimmer level is displayed, press and
release DIMMER•DEMO / CD INFO
repeatedly to select the desired level
(DIMM 1 - 3).
DIMM 2
Note:
• The dimmer level can only be adjust for
when the unit is in ON mode.
• In standby mode, the dimmer level
remains at DIMM 3 and in magic demo
mode, the dimmer level is at DIMM 1.
or to set
is