Sampling Tracks; Repeat; Setting Up A Cd Program; Playing A Program List - THOMSON MS2200 User Manual

MS2200 EN 11/17/03
CD Player

Sampling Tracks

Press INTRO•CT to play the first 10 seconds of
each track on the current disc, all discs in the tray,
or turn INTRO•CT mode off. (Remote Only)
Note:
You may also press REPEAT•RDS to select
1 disc or all discs before activating INTRO
& MIX functions

Repeat

Press REPEAT•RDS to repeat the current track,
current disc, all discs, or turn REPEAT mode off.
(Remote Only)

Setting Up a CD Program

You can program the CD player to play up to any
32 tracks on the CDs in the tray.
1. While the CD player is stopped, press
PROG•SET to enter program mode. The
system displays the next available program
number: "- - P:01," with "- -" flashing,
prompts you for the first track in the program
list.
5 P:01
2. Press SKIP BACKWARD
FORWARD
SKIP to select a track from a different disc).
3. Immediately press PROG•SET to assign the
selected track to the program number. After
3 seconds, you are prompted for the next track
in the program list.
(In CD program mode, PROG icon will be lit.)
1:59 PM Page 13
or SKIP
to select a track (press DISC

Playing a Program List

While in PROGRAM mode, press PLAY/PAUSE

Displaying the Program List

1. While the CD player is stopped, press
PROG•SET to enter PROGRAM mode.
2. Press PROG•SET repeatedly to list each track
assignment in the program list.

Deleting Program List

While in PROGRAM mode, press and hold STOP
for 3 seconds. The system displays the message
CLEAR.
Tips:
• You can create a program of up to 32
tracks.
• Press CD INFO repeatedly to view
elapsed track time, track number, track
remain time and disc remain time.
Attention:
Do not push to force closing of the tray
during CD playback or tray opening.
EN
.
8