Display Settings; Adjusting The Display Brightness; Sleep Mode; Display Alarm/Clock - THOMSON MS4000 User Manual

MS4000 EN 3/5/03 8:46 AM

Display Settings

Showing the Demonstration
Magic demonstration is available in all modes
except for when timer is on or sleep mode is
activated. Press DIMMER/DEMO to turn on/off
magic demonstration mode. The demonstration
scrolls through all display operations.
Display Clock / Alarm

Setting the Clock

1. Press and hold CLOCK/RDS until the hour flashes
on the display.
2. Press DIGITAL TUNING
hour and then press CLOCK/RDS to shift to minute
digits.
3. Press DIGITAL TUNING
minute.
4. Press PROG•SET to save settings and STOP
quit setting.
Note:
• When system is ON, you can press
CLOCK/RDS to display the current time for
about 2 seconds.
• Clock cannot be set in FM Mode.

Setting the Timer

1. Press and hold TIMER until the ON and clock time
flash on the display ( ON - timer on time ).
2. For setting time, press DIGITAL TUNING
to set the hour and then press TIMER to shift to
minute digits.
3. Press DIGITAL TUNING
minute.
4. Press TIMER to change to OF (timer off time)
with clock time flashing. Repeat steps 2 & 3 for
timer off time setting.
Page 9
5. Press TIMER to select source. Press DIGITAL
TUNING
TAPE/REC TU.
6. Press TIMER to set volume. Adjust volume with
the VOLUME CONTROL to set desired volume level.
7. Press PROG•SET to save settings or STOP
quit setting.

Activating the Timer

Press and release TIMER to turn on/off the alarm.
The alarm is active when the clock icon indicator
is lit.
or to set the

Adjusting the Display Brightness

1. Press and hold DIMMER/DEMO for more than 2
or to set the
seconds.
2. While the dimmer is displayed, press and release
to
DIMMER/DEMO to select the desired level (DIMM
1 - 3).
Note:
• The dimmer level can only be adjust for when
the unit is in ON mode.
In standby mode, the dimmer level remains at
DIMM 3 and in magic demo mode, the dimmer
level is at DIMM 1.
or

Sleep Mode

or to set the
You can select the time interval in minutes before
the unit turn off automatically. Press SLEEP on the
remote to select among OFF, 120, 90, 60, 45, 30, 15
and 5 minutes. (Remote only)
or to select between CD /TUNER/
DIMM 2
EN
to
5